Lead frame
Substrate AOI
SX1000
Compact body that does not take up space.
Inspection is possible even in the state of seat, frame and tray.
| PRODUCT OUTLINE | |
|---|---|
| Equipment size | W890 x D1,610 x H1,600mm |
| Applicable board size | 300mm ｘ 400mm |
| Line/Space | 15um/15um ～ |
| Target inspection | |
|---|---|
| Wiring inspection |  |
| Hole inspection | |
| Plain inspection | |
| Target product name |
|---|
|
Substrate AOI
SX3600/SX5600
High-end model compatible with line / space = 5/5 μm.
Realized with ultra-high accuracy from wiring inspection to laser via inspection.
| PRODUCT OUTLINE | |
|---|---|
| Equipment size | W1,280 x D2,200 x H1,890mm |
| Applicable board size | 600mm ｘ 600mm |
| Line/Space | 5um/5um ～ |
| Target inspection | |
|---|---|
| Wiring inspection | |
| Hole inspection | |
| Plain inspection | |
| Target product name |
|---|
|
Automatic transport inspection product
BF8000 Series
Double-sided automatic inspection product for frames
High-definition inspection is possible with lighting specialized for inspection targets
| PRODUCT OUTLINE | |
|---|---|
| Equipment size | W2,050 x D1,800 x H2,030mm |
| Applicable board size | width 50mm～150mm |
| Minimum defect size | □10um～ |
| Target inspection | |
|---|---|
| Wiring inspection | |
| Hole inspection | |
| Plain inspection | |
| Target product name |
|---|
|
Automatic transport inspection product
LF7000 Series
Visual inspection equipment for lead frames.
Inspection is possiblewith raw material and even after plating.
| PRODUCT OUTLINE | |
|---|---|
| Equipment size | W2,120 x D1,780 x H2,040mm |
| Applicable board size | 【LF7000】 【LF7100】 |
| Minimum defect size | □10um～ |
| Target inspection | |
|---|---|
| Wiring inspection | |
| Hole inspection | |
| Plain inspection | |
| Target product name |
|---|
|
Leed frame veryfy product
VF Series
Leed frame veryfy product
| PRODUCT OUTLINE | |
|---|---|
| Equipment size | W1,200 x D660 x H1,200m |
| Applicable board size | 240mm ｘ 80mm |
| Target product name |
|---|
|
Soft veryfy system
SV100
Verification work is possible with inspection results and NG cutout images.
Verification work is possible even in remote areas (general office / overseas, etc.)
| PRODUCT OUTLINE | |
|---|---|
| Equipment size | － |
| Applicable board size | － |
| Target product name |
|---|
|
Data mapping system
DM100
Inspection result aggregation confirmation software
You can check the result at a glance on the tabulation screen
| PRODUCT OUTLINE | |
|---|---|
| Equipment size | － |
| Applicable board size | － |
| Target product name |
|---|
|
Defect automatic classification system
Pentagon
Inspec's original defect screening algorithm "iDSA" significantly reduces verification man-hours
| PRODUCT OUTLINE | |
|---|---|
| Equipment size | － |
| Product roll width | － |
| Target product name |
|---|
|